.. _tutorial-salt-testing: ================================== Salt's Test Suite: An Introduction ================================== .. note:: This tutorial makes a couple of assumptions. The first assumption is that you have a basic knowledge of Salt. To get up to speed, check out the :ref:`Salt Walkthrough `. The second assumption is that your Salt development environment is already configured and that you have a basic understanding of contributing to the Salt codebase. If you're unfamiliar with either of these topics, please refer to the :ref:`Installing Salt for Development` and the :ref:`Contributing` pages, respectively. Salt comes with a powerful integration and unit test suite. The test suite allows for the fully automated run of integration and/or unit tests from a single interface. Salt's test suite is located under the ``tests`` directory in the root of Salt's code base and is divided into two main types of tests: :ref:`unit tests and integration tests `. The ``unit`` and ``integration`` sub-test-suites are located in the ``tests`` directory, which is where the majority of Salt's test cases are housed. .. _getting_set_up_for_tests: Getting Set Up For Tests ======================== There are a couple of requirements, in addition to Salt's requirements, that need to be installed in order to run Salt's test suite. You can install these additional requirements using the files located in the ``salt/requirements`` directory, depending on your relevant version of Python: .. code-block:: bash pip install -r requirements/dev_python27.txt pip install -r requirements/dev_python34.txt To be able to run integration tests which utilizes ZeroMQ transport, you also need to install additional requirements for it. Make sure you have installed the C/C++ compiler and development libraries and header files needed for your Python version. This is an example for RedHat-based operating systems: .. code-block:: bash yum install gcc gcc-c++ python-devel pip install -r requirements/zeromq.txt On Debian, Ubuntu or their derivatives run the following commands: .. code-block:: bash apt-get install build-essential python-dev pip install -r requirements/zeromq.txt This will install the latest ``pycrypto`` and ``pyzmq`` (with bundled ``libzmq``) Python modules required for running integration tests suite. Test Directory Structure ======================== As noted in the introduction to this tutorial, Salt's test suite is located in the ``tests`` directory in the root of Salt's code base. From there, the tests are divided into two groups ``integration`` and ``unit``. Within each of these directories, the directory structure roughly mirrors the directory structure of Salt's own codebase. For example, the files inside ``tests/integration/modules`` contains tests for the files located within ``salt/modules``. .. note:: ``tests/integration`` and ``tests/unit`` are the only directories discussed in this tutorial. With the exception of the ``tests/runtests.py`` file, which is used below in the `Running the Test Suite`_ section, the other directories and files located in ``tests`` are outside the scope of this tutorial. .. _integration-vs-unit: Integration vs. Unit -------------------- Given that Salt's test suite contains two powerful, though very different, testing approaches, when should you write integration tests and when should you write unit tests? Integration tests use Salt masters, minions, and a syndic to test salt functionality directly and focus on testing the interaction of these components. Salt's integration test runner includes functionality to run Salt execution modules, runners, states, shell commands, salt-ssh commands, salt-api commands, and more. This provides a tremendous ability to use Salt to test itself and makes writing such tests a breeze. Integration tests are the preferred method of testing Salt functionality when possible. Unit tests do not spin up any Salt daemons, but instead find their value in testing singular implementations of individual functions. Instead of testing against specific interactions, unit tests should be used to test a function's logic. Unit tests should be used to test a function's exit point(s) such as any ``return`` or ``raises`` statements. Unit tests are also useful in cases where writing an integration test might not be possible. While the integration test suite is extremely powerful, unfortunately at this time, it does not cover all functional areas of Salt's ecosystem. For example, at the time of this writing, there is not a way to write integration tests for Proxy Minions. Since the test runner will need to be adjusted to account for Proxy Minion processes, unit tests can still provide some testing support in the interim by testing the logic contained inside Proxy Minion functions. Running the Test Suite ====================== Once all of the :ref:`requirements ` are installed, the ``runtests.py`` file in the ``salt/tests`` directory is used to instantiate Salt's test suite: .. code-block:: bash python tests/runtests.py [OPTIONS] The command above, if executed without any options, will run the entire suite of integration and unit tests. Some tests require certain flags to run, such as destructive tests. If these flags are not included, then the test suite will only perform the tests that don't require special attention. At the end of the test run, you will see a summary output of the tests that passed, failed, or were skipped. The test runner also includes a ``--help`` option that lists all of the various command line options: .. code-block:: bash python tests/runtests.py --help You can also call the test runner as an executable: .. code-block:: bash ./tests/runtests.py --help Running Integration Tests ------------------------- Salt's set of integration tests use Salt to test itself. The integration portion of the test suite includes some built-in Salt daemons that will spin up in preparation of the test run. This list of Salt daemon processes includes: * 2 Salt Masters * 2 Salt Minions * 1 Salt Syndic These various daemons are used to execute Salt commands and functionality within the test suite, allowing you to write tests to assert against expected or unexpected behaviors. A simple example of a test utilizing a typical master/minion execution module command is the test for the ``test_ping`` function in the ``tests/integration/modules/test_test.py`` file: .. code-block:: python def test_ping(self): ''' test.ping ''' self.assertTrue(self.run_function('test.ping')) The test above is a very simple example where the ``test.ping`` function is executed by Salt's test suite runner and is asserting that the minion returned with a ``True`` response. .. _test-selection-options: Test Selection Options ~~~~~~~~~~~~~~~~~~~~~~ If you look in the output of the ``--help`` command of the test runner, you will see a section called ``Tests Selection Options``. The options under this section contain various subsections of the integration test suite such as ``--modules``, ``--ssh``, or ``--states``. By selecting any one of these options, the test daemons will spin up and the integration tests in the named subsection will run. .. code-block:: bash ./tests/runtests.py --modules .. note:: The testing subsections listed in the ``Tests Selection Options`` of the ``--help`` output *only* apply to the integration tests. They do not run unit tests. Running Unit Tests ------------------ While ``./tests/runtests.py`` executes the *entire* test suite (barring any tests requiring special flags), the ``--unit`` flag can be used to run *only* Salt's unit tests. Salt's unit tests include the tests located in the ``tests/unit`` directory. The unit tests do not spin up any Salt testing daemons as the integration tests do and execute very quickly compared to the integration tests. .. code-block:: bash ./tests/runtests.py --unit .. _running-specific-tests: Running Specific Tests ---------------------- There are times when a specific test file, test class, or even a single, individual test need to be executed, such as when writing new tests. In these situations, the ``--name`` option should be used. For running a single test file, such as the pillar module test file in the integration test directory, you must provide the file path using ``.`` instead of ``/`` as separators and no file extension: .. code-block:: bash ./tests/runtests.py --name=integration.modules.test_pillar ./tests/runtests.py -n integration.modules.test_pillar Some test files contain only one test class while other test files contain multiple test classes. To run a specific test class within the file, append the name of the test class to the end of the file path: .. code-block:: bash ./tests/runtests.py --name=integration.modules.test_pillar.PillarModuleTest ./tests/runtests.py -n integration.modules.test_pillar.PillarModuleTest To run a single test within a file, append both the name of the test class the individual test belongs to, as well as the name of the test itself: .. code-block:: bash ./tests/runtests.py \ --name=integration.modules.test_pillar.PillarModuleTest.test_data ./tests/runtests.py \ -n integration.modules.test_pillar.PillarModuleTest.test_data The ``--name`` and ``-n`` options can be used for unit tests as well as integration tests. The following command is an example of how to execute a single test found in the ``tests/unit/modules/test_cp.py`` file: .. code-block:: bash ./tests/runtests.py \ -n unit.modules.test_cp.CpTestCase.test_get_template_success Writing Tests for Salt ====================== Once you're comfortable running tests, you can now start writing them! Be sure to review the `Integration vs. Unit`_ section of this tutorial to determine what type of test makes the most sense for the code you're testing. .. note:: There are many decorators, naming conventions, and code specifications required for Salt test files. We will not be covering all of the these specifics in this tutorial. Please refer to the testing documentation links listed below in the `Additional Testing Documentation`_ section to learn more about these requirements. In the following sections, the test examples assume the "new" test is added to a test file that is already present and regularly running in the test suite and is written with the correct requirements. Writing Integration Tests ------------------------- Since integration tests validate against a running environment, as explained in the `Running Integration Tests`_ section of this tutorial, integration tests are very easy to write and are generally the preferred method of writing Salt tests. The following integration test is an example taken from the ``test.py`` file in the ``tests/integration/modules`` directory. This test uses the ``run_function`` method to test the functionality of a traditional execution module command. The ``run_function`` method uses the integration test daemons to execute a ``module.function`` command as you would with Salt. The minion runs the function and returns. The test also uses `Python's Assert Functions`_ to test that the minion's return is expected. .. code-block:: python def test_ping(self): ''' test.ping ''' self.assertTrue(self.run_function('test.ping')) Args can be passed in to the ``run_function`` method as well: .. code-block:: python def test_echo(self): ''' test.echo ''' self.assertEqual(self.run_function('test.echo', ['text']), 'text') The next example is taken from the ``tests/integration/modules/test_aliases.py`` file and demonstrates how to pass kwargs to the ``run_function`` call. Also note that this test uses another salt function to ensure the correct data is present (via the ``aliases.set_target`` call) before attempting to assert what the ``aliases.get_target`` call should return. .. code-block:: python def test_set_target(self): ''' aliases.set_target and aliases.get_target ''' set_ret = self.run_function( 'aliases.set_target', alias='fred', target='bob') self.assertTrue(set_ret) tgt_ret = self.run_function( 'aliases.get_target', alias='fred') self.assertEqual(tgt_ret, 'bob') Using multiple Salt commands in this manner provides two useful benefits. The first is that it provides some additional coverage for the ``aliases.set_target`` function. The second benefit is the call to ``aliases.get_target`` is not dependent on the presence of any aliases set outside of this test. Tests should not be dependent on the previous execution, success, or failure of other tests. They should be isolated from other tests as much as possible. While it might be tempting to build out a test file where tests depend on one another before running, this should be avoided. SaltStack recommends that each test should test a single functionality and not rely on other tests. Therefore, when possible, individual tests should also be broken up into singular pieces. These are not hard-and-fast rules, but serve more as recommendations to keep the test suite simple. This helps with debugging code and related tests when failures occur and problems are exposed. There may be instances where large tests use many asserts to set up a use case that protects against potential regressions. .. note:: The examples above all use the ``run_function`` option to test execution module functions in a traditional master/minion environment. To see examples of how to test other common Salt components such as runners, salt-api, and more, please refer to the :ref:`Integration Test Class Examples` documentation. Destructive vs Non-destructive Tests ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Since Salt is used to change the settings and behavior of systems, often, the best approach to run tests is to make actual changes to an underlying system. This is where the concept of destructive integration tests comes into play. Tests can be written to alter the system they are running on. This capability is what fills in the gap needed to properly test aspects of system management like package installation. To write a destructive test, import and use the ``destructiveTest`` decorator for the test method: .. code-block:: python import integration from tests.support.helpers import destructiveTest class PkgTest(integration.ModuleCase): @destructiveTest def test_pkg_install(self): ret = self.run_function('pkg.install', name='finch') self.assertSaltTrueReturn(ret) ret = self.run_function('pkg.purge', name='finch') self.assertSaltTrueReturn(ret) Writing Unit Tests ------------------ As explained in the `Integration vs. Unit`_ section above, unit tests should be written to test the *logic* of a function. This includes focusing on testing ``return`` and ``raises`` statements. Substantial effort should be made to mock external resources that are used in the code being tested. External resources that should be mocked include, but are not limited to, APIs, function calls, external data either globally available or passed in through function arguments, file data, etc. This practice helps to isolate unit tests to test Salt logic. One handy way to think about writing unit tests is to "block all of the exits". More information about how to properly mock external resources can be found in Salt's :ref:`Unit Test` documentation. Salt's unit tests utilize Python's mock class as well as `MagicMock`_. The ``@patch`` decorator is also heavily used when "blocking all the exits". A simple example of a unit test currently in use in Salt is the ``test_get_file_not_found`` test in the ``tests/unit/modules/test_cp.py`` file. This test uses the ``@patch`` decorator and ``MagicMock`` to mock the return of the call to Salt's ``cp.hash_file`` execution module function. This ensures that we're testing the ``cp.get_file`` function directly, instead of inadvertently testing the call to ``cp.hash_file``, which is used in ``cp.get_file``. .. code-block:: python def test_get_file_not_found(self): ''' Test if get_file can't find the file. ''' with patch('salt.modules.cp.hash_file', MagicMock(return_value=False)): path = 'salt://saltines' dest = '/srv/salt/cheese' ret = '' self.assertEqual(cp.get_file(path, dest), ret) Note that Salt's ``cp`` module is imported at the top of the file, along with all of the other necessary testing imports. The ``get_file`` function is then called directed in the testing function, instead of using the ``run_function`` method as the integration test examples do above. The call to ``cp.get_file`` returns an empty string when a ``hash_file`` isn't found. Therefore, the example above is a good illustration of a unit test "blocking the exits" via the ``@patch`` decorator, as well as testing logic via asserting against the ``return`` statement in the ``if`` clause. There are more examples of writing unit tests of varying complexities available in the following docs: * :ref:`Simple Unit Test Example` * :ref:`Complete Unit Test Example` * :ref:`Complex Unit Test Example` .. note:: Considerable care should be made to ensure that you're testing something useful in your test functions. It is very easy to fall into a situation where you have mocked so much of the original function that the test results in only asserting against the data you have provided. This results in a poor and fragile unit test. Checking for Log Messages ========================= To test to see if a given log message has been emitted, the following pattern can be used .. code-block:: python # Import logging handler from tests.support.helpers import TstSuiteLoggingHandler # .. inside test with TstSuiteLoggingHandler() as handler: for message in handler.messages: if message.startswith('ERROR: This is the error message we seek'): break else: raise AssertionError('Did not find error message') Automated Test Runs =================== SaltStack maintains a Jenkins server which can be viewed at https://jenkinsci.saltstack.com. The tests executed from this Jenkins server create fresh virtual machines for each test run, then execute the destructive tests on the new, clean virtual machine. This allows for the execution of tests across supported platforms. Additional Testing Documentation ================================ In addition to this tutorial, there are some other helpful resources and documentation that go into more depth on Salt's test runner, writing tests for Salt code, and general Python testing documentation. Please see the follow references for more information: * :ref:`Salt's Test Suite Documentation` * :ref:`Integration Tests` * :ref:`Unit Tests` * `MagicMock`_ * `Python Unittest`_ * `Python's Assert Functions`_ .. _MagicMock: https://docs.python.org/3/library/unittest.mock.html .. _Python Unittest: https://docs.python.org/2/library/unittest.html .. _Python's Assert Functions: https://docs.python.org/2/library/unittest.html#assert-methods